header photo

 

CornerBoard Tolerances

Length:   Plus or minus 1/8" on 48" and shorter boards. Anything over 48" will be plus or minus 3/8 of 1% of length. Example: 144" x .375% = .54" or plus or minus a little over ½ inch.

 Leg Dimensions:  Plus or minus 1/4" on even legs (3x3, 2x2, etc.), or plus or minus 1/2" on offset legs (2x4, 1x3, etc.). All CornerBoard legs are measured on the underside, from the edge of one leg to the other leg where it meets the radius.

 Thickness:  Plus or minus 5% of the CornerBoard caliper. Example: .225" CornerBoard is within thickness tolerance if it is between .213" and .237"

 Angle:  85 degrees - 110 degrees. CornerBoard is manufactured using recycled paperboard. These products are initially formed less than 90 degrees, but because the memory of the paperboard the CornerBoard normally will be more than a right angle.

 Packaging:  Plus or minus 5% of the standard packaging schedule. Example: 3x3x.225x36" is listed on the standard packaging schedule as having 1080 pieces per skid. The actual number of pieces could be between 1026 and 1134. The correct number of pieces will always be reflected on the bill of lading.

Standard Packing PIECES FOR PALLET Board Length  Download this table as PDF

 Caliper  Type Pieces per row 12" - 13.99"  14" - 24.99"  25" - 72.99"  73" - 155.99"  156" - 168.99"  169" - 192.99"  193" - 288" Average Wt. Per Lin. Ft.
0.0902x2 or 1x329011,3107,5403,7702,0301,7401,1608700.1151
 2.5x2.5 or 2x3 9,5706,3803,1901,7401,4508705800.1436
 3x3 or 2x4  7,830 5,2202,610  1,4501,160 8705800.1725
           
0.1202x2 or 1x3 2168,4245,616 2,8081,512 1,296864648 0.1535
 2.5x2.5 or 2x3 7,1284,7522,3761,2961,0806484320.1916
 3x3 or 2x4 5,8323,8881,9441,080 8646484320.2300
           
0.1402x2 or 1x3 1867,2544,8362,4181,3021,1167445580.1789 
 2.5x2.5 or 2x3 6,1384,0922,0461,1169305583720.2233 
 3x3 or 2x4 5,0223,3481,6749307445583720.2681 
           
0.1602x2 or 1x3 1626,3184,2122,1061,1349726484860.2046
 2.5x2.5 or 2x3 5,3463,5641,7829728104863240.2554
 3x3 or 2x4 4,3742,9161,4588106484863240.3067
           
0.1802x2 or 1x3 1445,6163,7441,8721,0088645764320.2302
 2.5x2.5 or 2x3 4,7523,1681,5848647204322880.2873
 3x3 or 2x4 3,8882,5921,2967205764322880.3450
           
0.2002x2 or 1x3 1325,1483,4321,7169247925283960.2555
 2.5x2.5 or 2x3 4,3562,9041,4527926603962640.3189
 3x3 or 2x4 3,5642,3761,1886605283962640.3828
           
0.2252x2 or 1x3 1204,6803,1201,5608407204803600.2875
 2.5x2.5 or 2x3 3,9602,6401,3207206003602400.3588
 3x3 or 2x4 3,2402,1601,0806004803602400.4308
           
0.2502x2 or 1x3 1084,2122,8081,4047566484323240.3194
 2.5x2.5 or 2x3 3,5602,3761,1886485403242160.3987
 3x3 or 2x4 2,9161,9449725404323242160.4786